Describe the bug
Since upgrading to kernel 6.18 (specifically tested on 6.18.34+rpt-rpi-2712), NVMe drives using the Silicon Motion SM2263XT / SM2263EN controller are completely invisible to the system. lspci returns absolutely nothing on the PCIe bus, as if no hardware were connected.
The exact same hardware configuration (same Pi 5, same NVMe HAT, same drive) works perfectly under kernel 6.12 (tested on 6.12.62+rpt-rpi-2712 and Home Assistant OS 17).
Steps to reproduce the behaviour
Install on a sdcard and boot with:
- OS: Raspberry Pi OS 64-bit Lite
- Broken Kernel: 6.18.34+rpt-rpi-2712 (Bus appears entirely empty)
nvme will not be seen, lspci returns absolutely nothing on the PCIe bus, as if no hardware were connected:
0002:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0002:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge
Works perfectly with previous version - kernel 6.12.62+rpt-rpi-2712 (Drive is detected and functional), lspci returns:
0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0001:01:00.0 Non-Volatile memory controller: Silicon Motion, Inc. SM2263EN/SM2263XT SSD Controller (rev 03)
0002:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0002:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge
Device (s)
more data on the controller: 0001:01:00.0 0108: 126f:2263 (rev 03)
Raspberry Pi 5
System
https://pastebin.com/8daic0QY
Logs
Output of dmesg | grep -i pci:
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=32 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=D8:3A:DD:E6:2F:5D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=79f2bfac-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=FR
[ 0.246084] PCI: CLS 0 bytes, default 64
[ 0.472693] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@1000110000 ranges:
[ 0.472712] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
[ 0.472719] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
[ 0.472729] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.472737] brcm-pcie 1000110000.pcie: IB MEM 0x1000131000..0x1000131fff -> 0xfffffff000
[ 0.474041] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0001:00
[ 0.474047] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.474051] pci_bus 0001:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
[ 0.474056] pci_bus 0001:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
[ 0.474068] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 0.474076] pci 0001:00:00.0: PCI bridge to [bus 00]
[ 0.474080] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.474084] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.474100] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 0.474652] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.850492] brcm-pcie 1000110000.pcie: link down
[ 0.850547] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.850556] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.850561] pci_bus 0001:00: resource 4 [mem 0x1b80000000-0x1bffffffff]
[ 0.850565] pci_bus 0001:00: resource 5 [mem 0x1800000000-0x1b7fffffff pref]
[ 0.850569] pci 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 0.850689] pcieport 0001:00:00.0: PME: Signaling with IRQ 38
[ 0.850734] pcieport 0001:00:00.0: AER: enabled with IRQ 38
[ 0.850833] pci_bus 0001:01: busn_res: [bus 01] is released
[ 0.850880] pci_bus 0001:00: busn_res: [bus 00-ff] is released
[ 0.850978] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:
[ 0.850988] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 0.850993] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 0.851001] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 0.851007] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.851012] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000
[ 0.852253] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00
[ 0.852258] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.852261] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.852265] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.852275] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 0.852282] pci 0002:00:00.0: PCI bridge to [bus 00]
[ 0.852286] pci 0002:00:00.0: bridge window [mem 0x1f80000000-0x1fbfffffff]
[ 0.852301] pci 0002:00:00.0: PME# supported from D0 D3hot
[ 0.852833] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.953374] brcm-pcie 1000120000.pcie: clkreq-mode set to default
[ 0.953378] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 0.953399] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint
[ 0.953438] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff]
[ 0.953442] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff]
[ 0.953446] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff]
[ 0.953497] pci 0002:01:00.0: supports D1
[ 0.953499] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.964943] pci 0002:01:00.0: ASPM: default states L1
[ 0.964950] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.964958] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f004fffff]: assigned
[ 0.964963] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned
[ 0.964968] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned
[ 0.964973] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned
[ 0.964979] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 0.964982] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f004fffff]
[ 0.964986] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb]
[ 0.964989] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref]
[ 0.964992] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f004fffff]
[ 0.964995] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 0.965004] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 0.965084] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
[ 0.965110] pcieport 0002:00:00.0: PME: Signaling with IRQ 39
[ 0.965149] pcieport 0002:00:00.0: AER: enabled with IRQ 39
Output of dmesg:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.18.34+rpt-rpi-2712 (serge@raspberrypi.com) (aarch64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT Debian 1:6.18.34-1+rpt1 (2026-06-09)
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000003a000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000003a000000..0x000000003dffffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[ 0.000000] OF: reserved mem: 0x000000003fd235e0..0x000000003fd23617 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] Faking node 0 at [mem 0x0000000000000000-0x000000003fffffff] (1024MB)
[ 0.000000] Faking node 1 at [mem 0x0000000040000000-0x000000007fffffff] (1024MB)
[ 0.000000] Faking node 2 at [mem 0x0000000080000000-0x00000000bfffffff] (1024MB)
[ 0.000000] Faking node 3 at [mem 0x00000000c0000000-0x00000000ffffffff] (1024MB)
[ 0.000000] Faking node 4 at [mem 0x0000000100000000-0x000000013fffffff] (1024MB)
[ 0.000000] Faking node 5 at [mem 0x0000000140000000-0x000000017fffffff] (1024MB)
[ 0.000000] Faking node 6 at [mem 0x0000000180000000-0x00000001bfffffff] (1024MB)
[ 0.000000] Faking node 7 at [mem 0x00000001c0000000-0x00000001ffffffff] (1024MB)
[ 0.000000] NODE_DATA(0) allocated [mem 0x3fbfd180-0x3fbfffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x7fffd180-0x7fffffff]
[ 0.000000] NODE_DATA(2) allocated [mem 0xbfffd180-0xbfffffff]
[ 0.000000] NODE_DATA(3) allocated [mem 0xffffd180-0xffffffff]
[ 0.000000] NODE_DATA(4) allocated [mem 0x13fffd180-0x13fffffff]
[ 0.000000] NODE_DATA(5) allocated [mem 0x17fffd180-0x17fffffff]
[ 0.000000] NODE_DATA(6) allocated [mem 0x1bfffd180-0x1bfffffff]
[ 0.000000] NODE_DATA(7) allocated [mem 0x1ffb9c4c0-0x1ffb9f33f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff]
[ 0.000000] node 1: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] node 2: [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] node 3: [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] node 4: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] node 5: [mem 0x0000000140000000-0x000000017fffffff]
[ 0.000000] node 6: [mem 0x0000000180000000-0x00000001bfffffff]
[ 0.000000] node 7: [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fbfffff]
[ 0.000000] Initmem setup node 1 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 2 [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 3 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 4 [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 5 [mem 0x0000000140000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 6 [mem 0x0000000180000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 7 [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.000000] On node 1, zone DMA: 256 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 9 pages/cpu s95512 r8192 d43752 u147456
[ 0.000000] pcpu-alloc: s95512 r8192 d43752 u147456 alloc=9*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=32 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=D8:3A:DD:E6:2F:5D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=79f2bfac-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=FR
[ 0.000000] cgroup: Disabling memory control group subsystem
[ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0-7'
[ 0.000000] DMA IOMMU NUMA default policy overridden to 'interleave:0-7'
[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[ 0.000000] Fallback order for Node 0: 0 1 2 3 4 5 6 7
[ 0.000000] Fallback order for Node 1: 1 2 3 4 5 6 7 0
[ 0.000000] Fallback order for Node 2: 2 3 4 5 6 7 0 1
[ 0.000000] Fallback order for Node 3: 3 4 5 6 7 0 1 2
[ 0.000000] Fallback order for Node 4: 4 5 6 7 0 1 2 3
[ 0.000000] Fallback order for Node 5: 5 6 7 0 1 2 3 4
[ 0.000000] Fallback order for Node 6: 6 7 0 1 2 3 4 5
[ 0.000000] Fallback order for Node 7: 7 0 1 2 3 4 5 6
[ 0.000000] Built 8 zonelists, mobility grouping on. Total pages: 524032
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8
[ 0.000000] ftrace: allocating 46711 entries in 46 pages
[ 0.000000] ftrace: allocated 46 pages with 4 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000087] Console: colour dummy device 80x25
[ 0.000091] printk: legacy console [tty1] enabled
[ 0.000282] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000287] pid_max: default: 32768 minimum: 301
[ 0.000379] LSM: initializing lsm=capability
[ 0.001835] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, vmalloc hugepage)
[ 0.002554] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, vmalloc hugepage)
[ 0.002597] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc)
[ 0.002614] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc)
[ 0.003254] rcu: Hierarchical SRCU implementation.
[ 0.003262] rcu: Max phase no-delay instances is 1000.
[ 0.003303] Timer migration: 1 hierarchy levels; 8 children per group; 0 crossnode level
[ 0.003625] EFI services will not be available.
[ 0.003689] smp: Bringing up secondary CPUs ...
[ 0.003873] Detected PIPT I-cache on CPU1
[ 0.003923] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.004159] Detected PIPT I-cache on CPU2
[ 0.004199] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.004374] Detected PIPT I-cache on CPU3
[ 0.004407] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.004432] smp: Brought up 8 nodes, 4 CPUs
[ 0.004447] SMP: Total of 4 processors activated.
[ 0.004450] CPU: All CPU(s) started at EL2
[ 0.004453] CPU features: detected: 32-bit EL0 Support
[ 0.004456] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.004459] CPU features: detected: Common not Private translations
[ 0.004462] CPU features: detected: CRC32 instructions
[ 0.004466] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.004469] CPU features: detected: LSE atomic instructions
[ 0.004472] CPU features: detected: Privileged Access Never
[ 0.004474] CPU features: detected: PMUv3
[ 0.004476] CPU features: detected: RAS Extension Support
[ 0.004480] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.004506] alternatives: applying system-wide alternatives
[ 0.006026] CPU features: detected: Hardware dirty bit management on CPU0-3
[ 0.006127] Memory: 8149584K/8384512K available (15040K kernel code, 2466K rwdata, 5216K rodata, 2240K init, 563K bss, 146800K reserved, 65536K cma-reserved)
[ 0.006306] devtmpfs: initialized
[ 0.008217] Enabled cp15_barrier support
[ 0.008225] Enabled setend support
[ 0.008347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008359] posixtimers hash table entries: 2048 (order: 1, 32768 bytes, vmalloc)
[ 0.008385] futex hash table entries: 128 (8192 bytes on 8 NUMA nodes, total 64 KiB, linear).
[ 0.008475] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.008478] 0 pages in range for non-PLT usage
[ 0.008479] 129452 pages in range for PLT usage
[ 0.008548] pinctrl core: initialized pinctrl subsystem
[ 0.008686] DMI not present or invalid.
[ 0.010954] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.011319] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.011359] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.011391] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.011407] audit: initializing netlink subsys (disabled)
[ 0.011439] audit: type=2000 audit(0.000:1): state=initialized audit_enabled=0 res=1
[ 0.011550] thermal_sys: Registered thermal governor 'step_wise'
[ 0.011558] cpuidle: using governor menu
[ 0.011617] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.011638] ASID allocator initialised with 32768 entries
[ 0.011830] Serial: AMBA PL011 UART driver
[ 0.012460] /soc@107c000000/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /soc@107c000000/interrupt-controller@7fff9000
[ 0.012622] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.012740] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 16, base_baud = 0) is a PL011 rev3
[ 0.012770] printk: console [ttyAMA10] enabled
[ 0.027075] raspberrypi-firmware soc@107c000000:firmware: Attached to firmware from 2026-05-26T15:01:25, variant start_cd
[ 0.031075] raspberrypi-firmware soc@107c000000:firmware: Firmware hash is 086b83e300000000000000000000000000000000
[ 0.052997] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 0.053256] iommu: Default domain type: Translated
[ 0.053260] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.060960] SCSI subsystem initialized
[ 0.060995] usbcore: registered new interface driver usbfs
[ 0.061002] usbcore: registered new interface driver hub
[ 0.061009] usbcore: registered new device driver usb
[ 0.061076] pps_core: LinuxPPS API ver. 1 registered
[ 0.061079] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.061084] PTP clock support registered
[ 0.061354] vgaarb: loaded
[ 0.068941] clocksource: Switched to clocksource arch_sys_counter
[ 0.241004] VFS: Disk quotas dquot_6.6.0
[ 0.241015] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 0.242129] NET: Registered PF_INET protocol family
[ 0.242309] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, vmalloc)
[ 0.243972] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, vmalloc)
[ 0.244006] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, vmalloc)
[ 0.244014] TCP established hash table entries: 65536 (order: 5, 524288 bytes, vmalloc)
[ 0.244206] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, vmalloc hugepage)
[ 0.245380] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.245553] MPTCP token hash table entries: 8192 (order: 4, 196608 bytes, vmalloc)
[ 0.245613] UDP hash table entries: 4096 (order: 4, 262144 bytes, vmalloc)
[ 0.245747] UDP-Lite hash table entries: 4096 (order: 4, 262144 bytes, vmalloc)
[ 0.245925] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.246067] RPC: Registered named UNIX socket transport module.
[ 0.246071] RPC: Registered udp transport module.
[ 0.246073] RPC: Registered tcp transport module.
[ 0.246075] RPC: Registered tcp-with-tls transport module.
[ 0.246077] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.246084] PCI: CLS 0 bytes, default 64
[ 0.246140] Trying to unpack rootfs image as initramfs...
[ 0.251389] kvm [1]: nv: 568 coarse grained trap handlers
[ 0.251516] kvm [1]: IPA Size Limit: 40 bits
[ 0.256588] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[ 0.262896] kvm [1]: vgic interrupt IRQ9
[ 0.269180] kvm [1]: VHE mode initialized successfully
[ 0.275823] Initialise system trusted keyrings
[ 0.276084] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.276394] NFS: Registering the id_resolver key type
[ 0.276404] Key type id_resolver registered
[ 0.276406] Key type id_legacy registered
[ 0.276417] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.276420] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.276623] Key type asymmetric registered
[ 0.276628] Asymmetric key parser 'x509' registered
[ 0.276649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.276683] io scheduler mq-deadline registered
[ 0.276687] io scheduler kyber registered
[ 0.276700] io scheduler bfq registered
[ 0.282075] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d510600, parent irq: 27)
[ 0.282121] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7c502000, parent irq: 28)
[ 0.282152] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d508380, parent irq: 29)
[ 0.282188] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d508400, parent irq: 30)
[ 0.282217] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d503000, parent irq: 31)
[ 0.288076] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.354684] Freeing initrd memory: 15936K
[ 0.404730] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.405066] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
[ 0.405108] serial serial0: tty port ttyS0 registered
[ 0.405364] iproc-rng200 107d208000.rng: hwrng registered
[ 0.405396] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 0.405625] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 0.407903] brd: module loaded
[ 0.408766] loop: module loaded
[ 0.409000] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.409120] Loading iSCSI transport class v2.0-870.
[ 0.409751] usbcore: registered new interface driver lan78xx
[ 0.409760] usbcore: registered new interface driver smsc95xx
[ 0.409803] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.409819] dwc_otg: FIQ enabled
[ 0.409820] dwc_otg: NAK holdoff enabled
[ 0.409821] dwc_otg: FIQ split-transaction FSM enabled
[ 0.409823] Module dwc_common_port init
[ 0.410006] usbcore: registered new interface driver uas
[ 0.410015] usbcore: registered new interface driver usb-storage
[ 0.410082] mousedev: PS/2 mouse device common for all mice
[ 0.417321] rpi-rtc soc@107c000000:rpi_rtc: registered as rtc0
[ 0.418657] rpi-rtc soc@107c000000:rpi_rtc: setting system clock to 2026-07-13T18:14:36 UTC (1783966476)
[ 0.418942] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 0.418946] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.421696] sdhci: Secure Digital Host Controller Interface driver
[ 0.421700] sdhci: Copyright(c) Pierre Ossman
[ 0.421727] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.421787] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.421816] hid: raw HID events driver (C) Jiri Kosina
[ 0.421834] usbcore: registered new interface driver usbhid
[ 0.421837] usbhid: USB HID core driver
[ 0.426497] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
[ 0.426712] NET: Registered PF_PACKET protocol family
[ 0.426735] Key type dns_resolver registered
[ 0.430308] registered taskstats version 1
[ 0.430362] Loading compiled-in X.509 certificates
[ 0.471948] Demotion targets for Node 0: null
[ 0.471952] Demotion targets for Node 1: null
[ 0.471953] Demotion targets for Node 2: null
[ 0.471955] Demotion targets for Node 3: null
[ 0.471958] Demotion targets for Node 4: null
[ 0.471960] Demotion targets for Node 5: null
[ 0.471962] Demotion targets for Node 6: null
[ 0.471963] Demotion targets for Node 7: null
[ 0.472028] Key type .fscrypt registered
[ 0.472031] Key type fscrypt-provisioning registered
[ 0.472693] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@1000110000 ranges:
[ 0.472712] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
[ 0.472719] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
[ 0.472729] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.472737] brcm-pcie 1000110000.pcie: IB MEM 0x1000131000..0x1000131fff -> 0xfffffff000
[ 0.474041] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0001:00
[ 0.474047] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.474051] pci_bus 0001:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
[ 0.474056] pci_bus 0001:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
[ 0.474068] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 0.474076] pci 0001:00:00.0: PCI bridge to [bus 00]
[ 0.474080] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.474084] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.474100] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 0.474652] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.850492] brcm-pcie 1000110000.pcie: link down
[ 0.850547] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.850556] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.850561] pci_bus 0001:00: resource 4 [mem 0x1b80000000-0x1bffffffff]
[ 0.850565] pci_bus 0001:00: resource 5 [mem 0x1800000000-0x1b7fffffff pref]
[ 0.850569] pci 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 0.850689] pcieport 0001:00:00.0: PME: Signaling with IRQ 38
[ 0.850734] pcieport 0001:00:00.0: AER: enabled with IRQ 38
[ 0.850833] pci_bus 0001:01: busn_res: [bus 01] is released
[ 0.850880] pci_bus 0001:00: busn_res: [bus 00-ff] is released
[ 0.850978] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:
[ 0.850988] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 0.850993] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 0.851001] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 0.851007] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.851012] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000
[ 0.852253] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00
[ 0.852258] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.852261] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.852265] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.852275] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 0.852282] pci 0002:00:00.0: PCI bridge to [bus 00]
[ 0.852286] pci 0002:00:00.0: bridge window [mem 0x1f80000000-0x1fbfffffff]
[ 0.852301] pci 0002:00:00.0: PME# supported from D0 D3hot
[ 0.852833] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.953374] brcm-pcie 1000120000.pcie: clkreq-mode set to default
[ 0.953378] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 0.953399] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint
[ 0.953438] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff]
[ 0.953442] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff]
[ 0.953446] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff]
[ 0.953497] pci 0002:01:00.0: supports D1
[ 0.953499] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.964943] pci 0002:01:00.0: ASPM: default states L1
[ 0.964950] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.964958] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f004fffff]: assigned
[ 0.964963] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned
[ 0.964968] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned
[ 0.964973] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned
[ 0.964979] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 0.964982] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f004fffff]
[ 0.964986] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb]
[ 0.964989] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref]
[ 0.964992] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f004fffff]
[ 0.964995] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 0.965004] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 0.965084] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
[ 0.965110] pcieport 0002:00:00.0: PME: Signaling with IRQ 39
[ 0.965149] pcieport 0002:00:00.0: AER: enabled with IRQ 39
[ 0.965248] rp1 0002:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 0.965253] rp1 0002:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 0.965265] rp1 0002:01:00.0: enabling device (0000 -> 0002)
[ 0.965872] rp1 0002:01:00.0: chip_id 0x20001927
[ 0.968136] bcm2712-iommu 1000005100.iommu: IOVA aperture 0xa00000000..0xb00000000 including DMA offset 0x0
[ 0.968154] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.968271] platform 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 0.968275] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.968280] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.968285] platform 1000800000.codec: Adding to iommu group 0
[ 0.968300] platform 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 0.968303] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.968310] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.968315] platform 1000880000.pisp_be: Adding to iommu group 0
[ 0.968371] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.968374] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.968411] bcm2712-iommu 1000005200.iommu: IOVA aperture 0xa00000000..0xa80000000 including DMA offset 0x0
[ 0.968427] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.968472] platform axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 0.968475] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 0.968479] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 0.968484] platform axi:gpu: Adding to iommu group 1
[ 0.968497] platform 107c580000.hvs: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 0.968500] platform 107c580000.hvs: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 0.968504] platform 107c580000.hvs: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 0.968508] platform 107c580000.hvs: Adding to iommu group 1
[ 0.968535] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 0.968538] platform 107c580000.hvs: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 0.968573] bcm2712-iommu 1000005280.iommu: IOVA aperture 0x1a00000000..0x1a80000000 including DMA offset 0x1000000000
[ 0.968589] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.968873] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[ 0.968991] mmc1: CQHCI version 5.10
[ 0.969020] mmc0: CQHCI version 5.10
[ 0.984340] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (d8:3a:dd:e6:2f:5d)
[ 0.984533] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 0.984736] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.984744] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 0.985181] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
[ 0.985193] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000
[ 0.985253] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.985256] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 0.985261] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 0.985305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.985309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.985313] usb usb1: Product: xHCI Host Controller
[ 0.985315] usb usb1: Manufacturer: Linux 6.18.34+rpt-rpi-2712 xhci-hcd
[ 0.985318] usb usb1: SerialNumber: xhci-hcd.0
[ 0.985420] hub 1-0:1.0: USB hub found
[ 0.985433] hub 1-0:1.0: 2 ports detected
[ 0.985539] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.985543] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.985546] usb usb2: Product: xHCI Host Controller
[ 0.985549] usb usb2: Manufacturer: Linux 6.18.34+rpt-rpi-2712 xhci-hcd
[ 0.985551] usb usb2: SerialNumber: xhci-hcd.0
[ 0.985611] hub 2-0:1.0: USB hub found
[ 0.985622] hub 2-0:1.0: 1 port detected
[ 0.985834] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.985840] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 0.986272] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
[ 0.986283] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000
[ 0.986345] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.986348] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 0.986353] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 0.986385] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.986389] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.986392] usb usb3: Product: xHCI Host Controller
[ 0.986395] usb usb3: Manufacturer: Linux 6.18.34+rpt-rpi-2712 xhci-hcd
[ 0.986397] usb usb3: SerialNumber: xhci-hcd.1
[ 0.986465] hub 3-0:1.0: USB hub found
[ 0.986477] hub 3-0:1.0: 2 ports detected
[ 0.986563] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.986567] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.986570] usb usb4: Product: xHCI Host Controller
[ 0.986573] usb usb4: Manufacturer: Linux 6.18.34+rpt-rpi-2712 xhci-hcd
[ 0.986575] usb usb4: SerialNumber: xhci-hcd.1
[ 0.986633] hub 4-0:1.0: USB hub found
[ 0.986645] hub 4-0:1.0: 1 port detected
[ 0.992729] of_cfs_init
[ 0.992757] of_cfs_init: OK
[ 0.992824] clk: Disabling unused clocks
[ 1.000947] PM: genpd: Disabling unused power domains
[ 1.020950] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 1.062493] mmc0: new high speed SDXC card at address 210b
[ 1.062646] mmcblk0: mmc0:210b APPSD 500 GiB
[ 1.064131] mmcblk0: p1 p2
[ 1.064198] mmcblk0: mmc0:210b APPSD 500 GiB
[ 1.156318] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 1.158321] Freeing unused kernel memory: 2240K
[ 1.158405] Run /init as init process
[ 1.158408] with arguments:
[ 1.158409] /init
[ 1.158410] with environment:
[ 1.158410] HOME=/
[ 1.158411] TERM=linux
[ 1.189452] mmc1: new UHS-I speed DDR50 SDIO card at address 0001
[ 1.259245] input: pwr_button as /devices/platform/pwr_button/input/input0
[ 1.270452] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
[ 1.270527] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
[ 3.718985] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 3.719223] EXT4-fs (mmcblk0p2): mounted filesystem 15f4c6be-1102-4331-9904-f78e78afd1fd ro with ordered data mode. Quota mode: none.
[ 4.665840] NET: Registered PF_INET6 protocol family
[ 4.666171] Segment Routing with IPv6
[ 4.666181] In-situ OAM (IOAM) with IPv6
[ 4.789325] systemd[1]: systemd 257.13-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 4.789343] systemd[1]: Detected architecture arm64.
[ 4.789794] systemd[1]: Detected first boot.
[ 4.810397] systemd[1]: Hostname set to .
[ 4.822692] systemd[1]: Initializing machine ID from random generator.
[ 4.955318] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
[ 4.955443] systemd[1]: Using hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0, device /dev/watchdog0
[ 4.955453] systemd[1]: Watchdog running with a hardware timeout of 1min.
[ 5.334959] zram_generator::config[218]: zram0: system has too much memory (8062MB), limit is 0MB, ignoring.
[ 6.565539] systemd[1]: Failed to populate /etc with preset unit settings, ignoring: Read-only file system
[ 6.653931] systemd[1]: Queued start job for default target multi-user.target.
[ 6.681688] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 6.682021] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 6.682255] systemd[1]: Created slice system-rpi\x2dsetup\x2dloop.slice - Slice /system/rpi-setup-loop.
[ 6.682498] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 6.682728] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 6.682957] systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
[ 6.683105] systemd[1]: Created slice user.slice - User and Session Slice.
[ 6.683187] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 6.683251] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 6.683424] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 6.683477] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-79f2bfac\x2d01.device - /dev/disk/by-partuuid/79f2bfac-01...
[ 6.683509] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10...
[ 6.683536] systemd[1]: Expecting device dev-zram0.device - /dev/zram0...
[ 6.683590] systemd[1]: Reached target paths.target - Path Units.
[ 6.683626] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 6.683659] systemd[1]: Reached target slices.target - Slice Units.
[ 6.684387] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 6.684477] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 6.684573] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 6.684672] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 6.684722] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki
[ 6.684738] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
[ 6.684802] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 6.684876] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 6.685011] systemd[1]: dev-hugepages.mount - Huge Pages File System skipped, unmet condition check ConditionPathExists=/sys/kernel/mm/hugepages
[ 6.687656] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 6.688216] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 6.688681] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 6.689136] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 6.689772] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 6.690333] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 6.690877] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 6.691412] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 6.691956] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 6.697092] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 6.697294] systemd[1]: systemd-fsck-root.service - File System Check on Root Device skipped, unmet condition check ConditionPathExists=!/run/initramfs/fsck-root
[ 6.697347] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
[ 6.769142] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 6.776426] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 6.781009] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
[ 6.785110] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 6.785213] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
[ 6.786094] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 6.787387] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 6.788210] fuse: init (API version 7.45)
[ 6.792468] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 6.792609] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 6.792689] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 6.792766] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 6.794800] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 6.795632] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 6.804635] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 6.805012] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 6.805119] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 6.805319] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 6.805394] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 6.806101] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 6.813099] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 6.820479] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 6.821226] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 6.821735] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 6.885215] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 7.114212] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 7.114342] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 7.930023] EXT4-fs (mmcblk0p2): re-mounted 15f4c6be-1102-4331-9904-f78e78afd1fd r/w.
[ 7.930732] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 7.931575] systemd[1]: Starting regenerate_ssh_host_keys.service - Regenerate SSH host keys...
[ 7.932430] systemd[1]: Starting rpi-resize-swap-file.service - rpi-resize-var-swap-service - resize swapfile...
[ 7.933652] systemd[1]: Starting systemd-growfs-root.service - Grow Root File System...
[ 7.976304] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database skipped, unmet condition check ConditionNeedsUpdate=/etc
[ 7.976373] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
[ 8.003387] zram: Added device: zram0
[ 8.003532] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 8.003634] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
[ 8.027612] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 8.035162] systemd-journald[298]: Collecting audit messages is disabled.
[ 8.045523] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 8.046914] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 8.070863] systemd[1]: Started systemd-journald.service - Journal Service.
[ 9.067198] systemd-journald[298]: Received client request to flush runtime journal.
[ 9.124316] EXT4-fs (mmcblk0p2): resizing filesystem from 130939136 to 130939136 blocks
[ 11.492974] bcm2835-pm 107d200000.watchdog: sync_state() pending due to 1002000000.v3d
[ 16.214402] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 112: bad block bitmap checksum
[ 18.360060] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 240: bad block bitmap checksum
[ 19.274673] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 368: bad block bitmap checksum
[ 19.296517] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 496: bad block bitmap checksum
[ 19.437285] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 624: bad block bitmap checksum
[ 19.455360] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 752: bad block bitmap checksum
[ 19.478923] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 880: bad block bitmap checksum
[ 19.500792] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1008: bad block bitmap checksum
[ 21.423555] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1136: bad block bitmap checksum
[ 21.447845] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1264: bad block bitmap checksum
[ 22.627003] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1392: bad block bitmap checksum
[ 22.660390] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1520: bad block bitmap checksum
[ 23.577973] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1648: bad block bitmap checksum
[ 23.598082] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1776: bad block bitmap checksum
[ 24.486683] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1904: bad block bitmap checksum
[ 24.507934] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2032: bad block bitmap checksum
[ 26.822624] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2160: bad block bitmap checksum
[ 26.837549] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2288: bad block bitmap checksum
[ 28.904327] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2416: bad block bitmap checksum
[ 28.906402] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 2654208
[ 28.919675] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2544: bad block bitmap checksum
[ 28.927374] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 4096000
[ 28.944211] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2672: bad block bitmap checksum
[ 28.955974] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 7962624
[ 28.969259] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2800: bad block bitmap checksum
[ 28.971342] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 11239424
[ 28.986526] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2928: bad block bitmap checksum
[ 28.988591] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 20480000
[ 29.001870] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 3056: bad block bitmap checksum
[ 29.003980] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 23887872
[ 29.021106] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 3184: bad block bitmap checksum
[ 29.024834] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 71663616
[ 29.038115] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 3312: bad block bitmap checksum
[ 29.040671] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 78675968
[ 29.059155] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 102400000
[ 30.316994] loop0: detected capacity change from 0 to 4194304
[ 30.604586] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 30.604669] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 30.605107] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 30.605147] rp1-firmware rp1_firmware: RP1 Firmware version 23fca1cd776798b50bd3e640ecb242215778e7f8
[ 30.605185] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 30.605210] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 30.605242] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 30.605260] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 30.605285] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 30.605321] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 30.605345] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 30.647413] rp1-pio 1f00178000.pio: Created instance as pio0
[ 30.666023] zram: setup backing device /dev/disk/by-backingfile/var-swap
[ 30.666823] zram0: detected capacity change from 0 to 4194304
[ 30.714608] mc: Linux media interface: v0.10
[ 30.774131] v3d 1002000000.v3d: [drm] Transparent Hugepage support is recommended for optimal performance on this platform!
[ 30.786867] [drm] Initialized v3d 1.0.0 for 1002000000.v3d on minor 0
[ 30.815003] videodev: Linux video capture interface: v2.00
[ 30.859348] Adding 2097136k swap on /dev/zram0. Priority:100 extents:1 across:2097136k SS
[ 30.928494] rpi-hevc-dec 1000800000.codec: Device registered as /dev/video19
[ 30.939263] Bluetooth: Core ver 2.22
[ 30.939298] NET: Registered PF_BLUETOOTH protocol family
[ 30.939403] Bluetooth: HCI device and connection manager initialized
[ 30.939435] Bluetooth: HCI socket layer initialized
[ 30.939460] Bluetooth: L2CAP socket layer initialized
[ 30.939487] Bluetooth: SCO socket layer initialized
[ 30.980637] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 30.980645] Bluetooth: HCI UART driver ver 2.3
[ 30.980653] Bluetooth: HCI UART protocol H4 registered
[ 30.982192] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 30.982476] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 30.982544] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 30.982633] Bluetooth: HCI UART protocol Broadcom registered
[ 30.985921] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 30.986116] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 30.986304] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 30.986492] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 31.333340] Bluetooth: hci0: BCM: chip id 107
[ 31.333556] Bluetooth: hci0: BCM: features 0x2f
[ 31.334601] Bluetooth: hci0: BCM4345C0
[ 31.334604] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 31.802183] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[ 31.810720] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 31.812476] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 31.812587] usbcore: registered new interface driver brcmfmac
[ 31.826163] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 31.831284] Registered IR keymap rc-cec
[ 31.831315] rc rc0: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0
[ 31.831357] input: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0/input1
[ 31.832962] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc@107c000000/107c701400.hdmi/sound/card0/input2
[ 31.837092] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[ 31.842315] Registered IR keymap rc-cec
[ 31.842350] rc rc1: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1
[ 31.842389] input: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1/input3
[ 31.843364] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc@107c000000/107c706400.hdmi/sound/card1/input4
[ 31.848476] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[ 31.848605] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[ 31.848662] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[ 31.848715] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 31.848762] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 31.849421] [drm] Initialized vc4 0.0.0 for axi:gpu on minor 1
[ 31.856001] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 31.865107] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 31.874938] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 32.176990] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 32.177245] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[ 32.469519] Bluetooth: hci0: BCM: features 0x2f
[ 32.470850] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 32.470855] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 32.471144] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
Additional context
Troubleshooting already attempted (unsuccessful on 6.18):
- Disabling ASPM (
pcie_aspm=off)
- Disabling HMB (
nvme_core.hmb=0)
- Forcing maximum power state latency (
nvme_core.default_ps_max_latency_us=0)
- Disabling ACPI quirks (
nvme.noacpi=1)
- Forcing PCIe Gen 2 or Gen 1 in config.txt (
dtparam=pciex1_gen=2)
Describe the bug
Since upgrading to kernel 6.18 (specifically tested on 6.18.34+rpt-rpi-2712), NVMe drives using the Silicon Motion SM2263XT / SM2263EN controller are completely invisible to the system.
lspcireturns absolutely nothing on the PCIe bus, as if no hardware were connected.The exact same hardware configuration (same Pi 5, same NVMe HAT, same drive) works perfectly under kernel 6.12 (tested on 6.12.62+rpt-rpi-2712 and Home Assistant OS 17).
Steps to reproduce the behaviour
Install on a sdcard and boot with:
nvme will not be seen,
lspcireturns absolutely nothing on the PCIe bus, as if no hardware were connected:0002:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0002:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge
Works perfectly with previous version - kernel 6.12.62+rpt-rpi-2712 (Drive is detected and functional), lspci returns:
0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0001:01:00.0 Non-Volatile memory controller: Silicon Motion, Inc. SM2263EN/SM2263XT SSD Controller (rev 03)
0002:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)
0002:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridge
Device (s)
more data on the controller: 0001:01:00.0 0108: 126f:2263 (rev 03)
Raspberry Pi 5
System
https://pastebin.com/8daic0QY
Logs
Output of dmesg | grep -i pci:
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=32 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=D8:3A:DD:E6:2F:5D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=79f2bfac-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=FR
[ 0.246084] PCI: CLS 0 bytes, default 64
[ 0.472693] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@1000110000 ranges:
[ 0.472712] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
[ 0.472719] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
[ 0.472729] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.472737] brcm-pcie 1000110000.pcie: IB MEM 0x1000131000..0x1000131fff -> 0xfffffff000
[ 0.474041] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0001:00
[ 0.474047] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.474051] pci_bus 0001:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
[ 0.474056] pci_bus 0001:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
[ 0.474068] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 0.474076] pci 0001:00:00.0: PCI bridge to [bus 00]
[ 0.474080] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.474084] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.474100] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 0.474652] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.850492] brcm-pcie 1000110000.pcie: link down
[ 0.850547] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.850556] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.850561] pci_bus 0001:00: resource 4 [mem 0x1b80000000-0x1bffffffff]
[ 0.850565] pci_bus 0001:00: resource 5 [mem 0x1800000000-0x1b7fffffff pref]
[ 0.850569] pci 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 0.850689] pcieport 0001:00:00.0: PME: Signaling with IRQ 38
[ 0.850734] pcieport 0001:00:00.0: AER: enabled with IRQ 38
[ 0.850833] pci_bus 0001:01: busn_res: [bus 01] is released
[ 0.850880] pci_bus 0001:00: busn_res: [bus 00-ff] is released
[ 0.850978] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:
[ 0.850988] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 0.850993] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 0.851001] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 0.851007] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.851012] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000
[ 0.852253] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00
[ 0.852258] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.852261] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.852265] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.852275] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 0.852282] pci 0002:00:00.0: PCI bridge to [bus 00]
[ 0.852286] pci 0002:00:00.0: bridge window [mem 0x1f80000000-0x1fbfffffff]
[ 0.852301] pci 0002:00:00.0: PME# supported from D0 D3hot
[ 0.852833] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.953374] brcm-pcie 1000120000.pcie: clkreq-mode set to default
[ 0.953378] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 0.953399] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint
[ 0.953438] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff]
[ 0.953442] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff]
[ 0.953446] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff]
[ 0.953497] pci 0002:01:00.0: supports D1
[ 0.953499] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.964943] pci 0002:01:00.0: ASPM: default states L1
[ 0.964950] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.964958] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f004fffff]: assigned
[ 0.964963] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned
[ 0.964968] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned
[ 0.964973] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned
[ 0.964979] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 0.964982] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f004fffff]
[ 0.964986] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb]
[ 0.964989] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref]
[ 0.964992] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f004fffff]
[ 0.964995] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 0.965004] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 0.965084] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
[ 0.965110] pcieport 0002:00:00.0: PME: Signaling with IRQ 39
[ 0.965149] pcieport 0002:00:00.0: AER: enabled with IRQ 39
Output of dmesg:
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.18.34+rpt-rpi-2712 (serge@raspberrypi.com) (aarch64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT Debian 1:6.18.34-1+rpt1 (2026-06-09)
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000003a000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000003a000000..0x000000003dffffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[ 0.000000] OF: reserved mem: 0x000000003fd235e0..0x000000003fd23617 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
[ 0.000000] Faking node 0 at [mem 0x0000000000000000-0x000000003fffffff] (1024MB)
[ 0.000000] Faking node 1 at [mem 0x0000000040000000-0x000000007fffffff] (1024MB)
[ 0.000000] Faking node 2 at [mem 0x0000000080000000-0x00000000bfffffff] (1024MB)
[ 0.000000] Faking node 3 at [mem 0x00000000c0000000-0x00000000ffffffff] (1024MB)
[ 0.000000] Faking node 4 at [mem 0x0000000100000000-0x000000013fffffff] (1024MB)
[ 0.000000] Faking node 5 at [mem 0x0000000140000000-0x000000017fffffff] (1024MB)
[ 0.000000] Faking node 6 at [mem 0x0000000180000000-0x00000001bfffffff] (1024MB)
[ 0.000000] Faking node 7 at [mem 0x00000001c0000000-0x00000001ffffffff] (1024MB)
[ 0.000000] NODE_DATA(0) allocated [mem 0x3fbfd180-0x3fbfffff]
[ 0.000000] NODE_DATA(1) allocated [mem 0x7fffd180-0x7fffffff]
[ 0.000000] NODE_DATA(2) allocated [mem 0xbfffd180-0xbfffffff]
[ 0.000000] NODE_DATA(3) allocated [mem 0xffffd180-0xffffffff]
[ 0.000000] NODE_DATA(4) allocated [mem 0x13fffd180-0x13fffffff]
[ 0.000000] NODE_DATA(5) allocated [mem 0x17fffd180-0x17fffffff]
[ 0.000000] NODE_DATA(6) allocated [mem 0x1bfffd180-0x1bfffffff]
[ 0.000000] NODE_DATA(7) allocated [mem 0x1ffb9c4c0-0x1ffb9f33f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff]
[ 0.000000] node 1: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] node 2: [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] node 3: [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] node 4: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] node 5: [mem 0x0000000140000000-0x000000017fffffff]
[ 0.000000] node 6: [mem 0x0000000180000000-0x00000001bfffffff]
[ 0.000000] node 7: [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fbfffff]
[ 0.000000] Initmem setup node 1 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 2 [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] Initmem setup node 3 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Initmem setup node 4 [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 5 [mem 0x0000000140000000-0x000000017fffffff]
[ 0.000000] Initmem setup node 6 [mem 0x0000000180000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 7 [mem 0x00000001c0000000-0x00000001ffffffff]
[ 0.000000] On node 1, zone DMA: 256 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 9 pages/cpu s95512 r8192 d43752 u147456
[ 0.000000] pcpu-alloc: s95512 r8192 d43752 u147456 alloc=9*16384
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=32 numa=fake=8 system_heap.max_order=0 iommu_dma_numa_policy=interleave smsc95xx.macaddr=D8:3A:DD:E6:2F:5D vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 console=ttyAMA10,115200 console=tty1 root=PARTUUID=79f2bfac-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=FR
[ 0.000000] cgroup: Disabling memory control group subsystem
[ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0-7'
[ 0.000000] DMA IOMMU NUMA default policy overridden to 'interleave:0-7'
[ 0.000000] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fbffc000-0x00000000ffffc000] (64MB)
[ 0.000000] Fallback order for Node 0: 0 1 2 3 4 5 6 7
[ 0.000000] Fallback order for Node 1: 1 2 3 4 5 6 7 0
[ 0.000000] Fallback order for Node 2: 2 3 4 5 6 7 0 1
[ 0.000000] Fallback order for Node 3: 3 4 5 6 7 0 1 2
[ 0.000000] Fallback order for Node 4: 4 5 6 7 0 1 2 3
[ 0.000000] Fallback order for Node 5: 5 6 7 0 1 2 3 4
[ 0.000000] Fallback order for Node 6: 6 7 0 1 2 3 4 5
[ 0.000000] Fallback order for Node 7: 7 0 1 2 3 4 5 6
[ 0.000000] Built 8 zonelists, mobility grouping on. Total pages: 524032
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8
[ 0.000000] ftrace: allocating 46711 entries in 46 pages
[ 0.000000] ftrace: allocated 46 pages with 4 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000087] Console: colour dummy device 80x25
[ 0.000091] printk: legacy console [tty1] enabled
[ 0.000282] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000287] pid_max: default: 32768 minimum: 301
[ 0.000379] LSM: initializing lsm=capability
[ 0.001835] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, vmalloc hugepage)
[ 0.002554] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, vmalloc hugepage)
[ 0.002597] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc)
[ 0.002614] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, vmalloc)
[ 0.003254] rcu: Hierarchical SRCU implementation.
[ 0.003262] rcu: Max phase no-delay instances is 1000.
[ 0.003303] Timer migration: 1 hierarchy levels; 8 children per group; 0 crossnode level
[ 0.003625] EFI services will not be available.
[ 0.003689] smp: Bringing up secondary CPUs ...
[ 0.003873] Detected PIPT I-cache on CPU1
[ 0.003923] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.004159] Detected PIPT I-cache on CPU2
[ 0.004199] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.004374] Detected PIPT I-cache on CPU3
[ 0.004407] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.004432] smp: Brought up 8 nodes, 4 CPUs
[ 0.004447] SMP: Total of 4 processors activated.
[ 0.004450] CPU: All CPU(s) started at EL2
[ 0.004453] CPU features: detected: 32-bit EL0 Support
[ 0.004456] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.004459] CPU features: detected: Common not Private translations
[ 0.004462] CPU features: detected: CRC32 instructions
[ 0.004466] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.004469] CPU features: detected: LSE atomic instructions
[ 0.004472] CPU features: detected: Privileged Access Never
[ 0.004474] CPU features: detected: PMUv3
[ 0.004476] CPU features: detected: RAS Extension Support
[ 0.004480] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.004506] alternatives: applying system-wide alternatives
[ 0.006026] CPU features: detected: Hardware dirty bit management on CPU0-3
[ 0.006127] Memory: 8149584K/8384512K available (15040K kernel code, 2466K rwdata, 5216K rodata, 2240K init, 563K bss, 146800K reserved, 65536K cma-reserved)
[ 0.006306] devtmpfs: initialized
[ 0.008217] Enabled cp15_barrier support
[ 0.008225] Enabled setend support
[ 0.008347] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008359] posixtimers hash table entries: 2048 (order: 1, 32768 bytes, vmalloc)
[ 0.008385] futex hash table entries: 128 (8192 bytes on 8 NUMA nodes, total 64 KiB, linear).
[ 0.008475] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.008478] 0 pages in range for non-PLT usage
[ 0.008479] 129452 pages in range for PLT usage
[ 0.008548] pinctrl core: initialized pinctrl subsystem
[ 0.008686] DMI not present or invalid.
[ 0.010954] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.011319] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.011359] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.011391] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.011407] audit: initializing netlink subsys (disabled)
[ 0.011439] audit: type=2000 audit(0.000:1): state=initialized audit_enabled=0 res=1
[ 0.011550] thermal_sys: Registered thermal governor 'step_wise'
[ 0.011558] cpuidle: using governor menu
[ 0.011617] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.011638] ASID allocator initialised with 32768 entries
[ 0.011830] Serial: AMBA PL011 UART driver
[ 0.012460] /soc@107c000000/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /soc@107c000000/interrupt-controller@7fff9000
[ 0.012622] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.012740] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 16, base_baud = 0) is a PL011 rev3
[ 0.012770] printk: console [ttyAMA10] enabled
[ 0.027075] raspberrypi-firmware soc@107c000000:firmware: Attached to firmware from 2026-05-26T15:01:25, variant start_cd
[ 0.031075] raspberrypi-firmware soc@107c000000:firmware: Firmware hash is 086b83e300000000000000000000000000000000
[ 0.052997] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 0.053256] iommu: Default domain type: Translated
[ 0.053260] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.060960] SCSI subsystem initialized
[ 0.060995] usbcore: registered new interface driver usbfs
[ 0.061002] usbcore: registered new interface driver hub
[ 0.061009] usbcore: registered new device driver usb
[ 0.061076] pps_core: LinuxPPS API ver. 1 registered
[ 0.061079] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.061084] PTP clock support registered
[ 0.061354] vgaarb: loaded
[ 0.068941] clocksource: Switched to clocksource arch_sys_counter
[ 0.241004] VFS: Disk quotas dquot_6.6.0
[ 0.241015] VFS: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
[ 0.242129] NET: Registered PF_INET protocol family
[ 0.242309] IP idents hash table entries: 131072 (order: 6, 1048576 bytes, vmalloc)
[ 0.243972] tcp_listen_portaddr_hash hash table entries: 4096 (order: 2, 65536 bytes, vmalloc)
[ 0.244006] Table-perturb hash table entries: 65536 (order: 4, 262144 bytes, vmalloc)
[ 0.244014] TCP established hash table entries: 65536 (order: 5, 524288 bytes, vmalloc)
[ 0.244206] TCP bind hash table entries: 65536 (order: 7, 2097152 bytes, vmalloc hugepage)
[ 0.245380] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.245553] MPTCP token hash table entries: 8192 (order: 4, 196608 bytes, vmalloc)
[ 0.245613] UDP hash table entries: 4096 (order: 4, 262144 bytes, vmalloc)
[ 0.245747] UDP-Lite hash table entries: 4096 (order: 4, 262144 bytes, vmalloc)
[ 0.245925] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.246067] RPC: Registered named UNIX socket transport module.
[ 0.246071] RPC: Registered udp transport module.
[ 0.246073] RPC: Registered tcp transport module.
[ 0.246075] RPC: Registered tcp-with-tls transport module.
[ 0.246077] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.246084] PCI: CLS 0 bytes, default 64
[ 0.246140] Trying to unpack rootfs image as initramfs...
[ 0.251389] kvm [1]: nv: 568 coarse grained trap handlers
[ 0.251516] kvm [1]: IPA Size Limit: 40 bits
[ 0.256588] kvm [1]: GICV region size/alignment is unsafe, using trapping (reduced performance)
[ 0.262896] kvm [1]: vgic interrupt IRQ9
[ 0.269180] kvm [1]: VHE mode initialized successfully
[ 0.275823] Initialise system trusted keyrings
[ 0.276084] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 0.276394] NFS: Registering the id_resolver key type
[ 0.276404] Key type id_resolver registered
[ 0.276406] Key type id_legacy registered
[ 0.276417] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.276420] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.276623] Key type asymmetric registered
[ 0.276628] Asymmetric key parser 'x509' registered
[ 0.276649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.276683] io scheduler mq-deadline registered
[ 0.276687] io scheduler kyber registered
[ 0.276700] io scheduler bfq registered
[ 0.282075] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d510600, parent irq: 27)
[ 0.282121] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7c502000, parent irq: 28)
[ 0.282152] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d508380, parent irq: 29)
[ 0.282188] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d508400, parent irq: 30)
[ 0.282217] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d503000, parent irq: 31)
[ 0.288076] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.354684] Freeing initrd memory: 15936K
[ 0.404730] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.405066] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
[ 0.405108] serial serial0: tty port ttyS0 registered
[ 0.405364] iproc-rng200 107d208000.rng: hwrng registered
[ 0.405396] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 0.405625] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 0.407903] brd: module loaded
[ 0.408766] loop: module loaded
[ 0.409000] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 0.409120] Loading iSCSI transport class v2.0-870.
[ 0.409751] usbcore: registered new interface driver lan78xx
[ 0.409760] usbcore: registered new interface driver smsc95xx
[ 0.409803] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.409819] dwc_otg: FIQ enabled
[ 0.409820] dwc_otg: NAK holdoff enabled
[ 0.409821] dwc_otg: FIQ split-transaction FSM enabled
[ 0.409823] Module dwc_common_port init
[ 0.410006] usbcore: registered new interface driver uas
[ 0.410015] usbcore: registered new interface driver usb-storage
[ 0.410082] mousedev: PS/2 mouse device common for all mice
[ 0.417321] rpi-rtc soc@107c000000:rpi_rtc: registered as rtc0
[ 0.418657] rpi-rtc soc@107c000000:rpi_rtc: setting system clock to 2026-07-13T18:14:36 UTC (1783966476)
[ 0.418942] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 0.418946] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 0.421696] sdhci: Secure Digital Host Controller Interface driver
[ 0.421700] sdhci: Copyright(c) Pierre Ossman
[ 0.421727] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.421787] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.421816] hid: raw HID events driver (C) Jiri Kosina
[ 0.421834] usbcore: registered new interface driver usbhid
[ 0.421837] usbhid: USB HID core driver
[ 0.426497] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
[ 0.426712] NET: Registered PF_PACKET protocol family
[ 0.426735] Key type dns_resolver registered
[ 0.430308] registered taskstats version 1
[ 0.430362] Loading compiled-in X.509 certificates
[ 0.471948] Demotion targets for Node 0: null
[ 0.471952] Demotion targets for Node 1: null
[ 0.471953] Demotion targets for Node 2: null
[ 0.471955] Demotion targets for Node 3: null
[ 0.471958] Demotion targets for Node 4: null
[ 0.471960] Demotion targets for Node 5: null
[ 0.471962] Demotion targets for Node 6: null
[ 0.471963] Demotion targets for Node 7: null
[ 0.472028] Key type .fscrypt registered
[ 0.472031] Key type fscrypt-provisioning registered
[ 0.472693] brcm-pcie 1000110000.pcie: host bridge /axi/pcie@1000110000 ranges:
[ 0.472712] brcm-pcie 1000110000.pcie: MEM 0x1b80000000..0x1bffffffff -> 0x0080000000
[ 0.472719] brcm-pcie 1000110000.pcie: MEM 0x1800000000..0x1b7fffffff -> 0x0400000000
[ 0.472729] brcm-pcie 1000110000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.472737] brcm-pcie 1000110000.pcie: IB MEM 0x1000131000..0x1000131fff -> 0xfffffff000
[ 0.474041] brcm-pcie 1000110000.pcie: PCI host bridge to bus 0001:00
[ 0.474047] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.474051] pci_bus 0001:00: root bus resource [mem 0x1b80000000-0x1bffffffff] (bus address [0x80000000-0xffffffff])
[ 0.474056] pci_bus 0001:00: root bus resource [mem 0x1800000000-0x1b7fffffff pref] (bus address [0x400000000-0x77fffffff])
[ 0.474068] pci 0001:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 0.474076] pci 0001:00:00.0: PCI bridge to [bus 00]
[ 0.474080] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 0.474084] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 0.474100] pci 0001:00:00.0: PME# supported from D0 D3hot
[ 0.474652] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.850492] brcm-pcie 1000110000.pcie: link down
[ 0.850547] pci_bus 0001:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.850556] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 0.850561] pci_bus 0001:00: resource 4 [mem 0x1b80000000-0x1bffffffff]
[ 0.850565] pci_bus 0001:00: resource 5 [mem 0x1800000000-0x1b7fffffff pref]
[ 0.850569] pci 0001:00:00.0: Max Payload Size set to 512/ 512 (was 128), Max Read Rq 512
[ 0.850689] pcieport 0001:00:00.0: PME: Signaling with IRQ 38
[ 0.850734] pcieport 0001:00:00.0: AER: enabled with IRQ 38
[ 0.850833] pci_bus 0001:01: busn_res: [bus 01] is released
[ 0.850880] pci_bus 0001:00: busn_res: [bus 00-ff] is released
[ 0.850978] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:
[ 0.850988] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 0.850993] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 0.851001] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 0.851007] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 0.851012] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000
[ 0.852253] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00
[ 0.852258] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 0.852261] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 0.852265] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 0.852275] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 0.852282] pci 0002:00:00.0: PCI bridge to [bus 00]
[ 0.852286] pci 0002:00:00.0: bridge window [mem 0x1f80000000-0x1fbfffffff]
[ 0.852301] pci 0002:00:00.0: PME# supported from D0 D3hot
[ 0.852833] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.953374] brcm-pcie 1000120000.pcie: clkreq-mode set to default
[ 0.953378] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 0.953399] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint
[ 0.953438] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff]
[ 0.953442] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff]
[ 0.953446] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff]
[ 0.953497] pci 0002:01:00.0: supports D1
[ 0.953499] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.964943] pci 0002:01:00.0: ASPM: default states L1
[ 0.964950] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.964958] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f004fffff]: assigned
[ 0.964963] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned
[ 0.964968] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned
[ 0.964973] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned
[ 0.964979] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 0.964982] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f004fffff]
[ 0.964986] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb]
[ 0.964989] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref]
[ 0.964992] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f004fffff]
[ 0.964995] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 0.965004] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 0.965084] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
[ 0.965110] pcieport 0002:00:00.0: PME: Signaling with IRQ 39
[ 0.965149] pcieport 0002:00:00.0: AER: enabled with IRQ 39
[ 0.965248] rp1 0002:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 0.965253] rp1 0002:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 0.965265] rp1 0002:01:00.0: enabling device (0000 -> 0002)
[ 0.965872] rp1 0002:01:00.0: chip_id 0x20001927
[ 0.968136] bcm2712-iommu 1000005100.iommu: IOVA aperture 0xa00000000..0xb00000000 including DMA offset 0x0
[ 0.968154] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.968271] platform 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 0.968275] platform 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.968280] platform 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.968285] platform 1000800000.codec: Adding to iommu group 0
[ 0.968300] platform 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 0.968303] platform 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 0.968310] platform 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 0.968315] platform 1000880000.pisp_be: Adding to iommu group 0
[ 0.968371] platform 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.968374] platform 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 0.968411] bcm2712-iommu 1000005200.iommu: IOVA aperture 0xa00000000..0xa80000000 including DMA offset 0x0
[ 0.968427] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.968472] platform axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 0.968475] platform axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 0.968479] platform axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 0.968484] platform axi:gpu: Adding to iommu group 1
[ 0.968497] platform 107c580000.hvs: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 0.968500] platform 107c580000.hvs: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 0.968504] platform 107c580000.hvs: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 0.968508] platform 107c580000.hvs: Adding to iommu group 1
[ 0.968535] platform axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 0.968538] platform 107c580000.hvs: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 0.968573] bcm2712-iommu 1000005280.iommu: IOVA aperture 0x1a00000000..0x1a80000000 including DMA offset 0x1000000000
[ 0.968589] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 0.968873] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[ 0.968991] mmc1: CQHCI version 5.10
[ 0.969020] mmc0: CQHCI version 5.10
[ 0.984340] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 107 (d8:3a:dd:e6:2f:5d)
[ 0.984533] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 0.984736] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.984744] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 0.985181] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
[ 0.985193] xhci-hcd xhci-hcd.0: irq 132, io mem 0x1f00200000
[ 0.985253] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 0.985256] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 0.985261] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 0.985305] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.985309] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.985313] usb usb1: Product: xHCI Host Controller
[ 0.985315] usb usb1: Manufacturer: Linux 6.18.34+rpt-rpi-2712 xhci-hcd
[ 0.985318] usb usb1: SerialNumber: xhci-hcd.0
[ 0.985420] hub 1-0:1.0: USB hub found
[ 0.985433] hub 1-0:1.0: 2 ports detected
[ 0.985539] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.985543] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.985546] usb usb2: Product: xHCI Host Controller
[ 0.985549] usb usb2: Manufacturer: Linux 6.18.34+rpt-rpi-2712 xhci-hcd
[ 0.985551] usb usb2: SerialNumber: xhci-hcd.0
[ 0.985611] hub 2-0:1.0: USB hub found
[ 0.985622] hub 2-0:1.0: 1 port detected
[ 0.985834] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.985840] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 0.986272] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
[ 0.986283] xhci-hcd xhci-hcd.1: irq 137, io mem 0x1f00300000
[ 0.986345] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 0.986348] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 0.986353] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 0.986385] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.18
[ 0.986389] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.986392] usb usb3: Product: xHCI Host Controller
[ 0.986395] usb usb3: Manufacturer: Linux 6.18.34+rpt-rpi-2712 xhci-hcd
[ 0.986397] usb usb3: SerialNumber: xhci-hcd.1
[ 0.986465] hub 3-0:1.0: USB hub found
[ 0.986477] hub 3-0:1.0: 2 ports detected
[ 0.986563] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.18
[ 0.986567] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.986570] usb usb4: Product: xHCI Host Controller
[ 0.986573] usb usb4: Manufacturer: Linux 6.18.34+rpt-rpi-2712 xhci-hcd
[ 0.986575] usb usb4: SerialNumber: xhci-hcd.1
[ 0.986633] hub 4-0:1.0: USB hub found
[ 0.986645] hub 4-0:1.0: 1 port detected
[ 0.992729] of_cfs_init
[ 0.992757] of_cfs_init: OK
[ 0.992824] clk: Disabling unused clocks
[ 1.000947] PM: genpd: Disabling unused power domains
[ 1.020950] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 1.062493] mmc0: new high speed SDXC card at address 210b
[ 1.062646] mmcblk0: mmc0:210b APPSD 500 GiB
[ 1.064131] mmcblk0: p1 p2
[ 1.064198] mmcblk0: mmc0:210b APPSD 500 GiB
[ 1.156318] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 1.158321] Freeing unused kernel memory: 2240K
[ 1.158405] Run /init as init process
[ 1.158408] with arguments:
[ 1.158409] /init
[ 1.158410] with environment:
[ 1.158410] HOME=/
[ 1.158411] TERM=linux
[ 1.189452] mmc1: new UHS-I speed DDR50 SDIO card at address 0001
[ 1.259245] input: pwr_button as /devices/platform/pwr_button/input/input0
[ 1.270452] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
[ 1.270527] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
[ 3.718985] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[ 3.719223] EXT4-fs (mmcblk0p2): mounted filesystem 15f4c6be-1102-4331-9904-f78e78afd1fd ro with ordered data mode. Quota mode: none.
[ 4.665840] NET: Registered PF_INET6 protocol family
[ 4.666171] Segment Routing with IPv6
[ 4.666181] In-situ OAM (IOAM) with IPv6
[ 4.789325] systemd[1]: systemd 257.13-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[ 4.789343] systemd[1]: Detected architecture arm64.
[ 4.789794] systemd[1]: Detected first boot.
[ 4.810397] systemd[1]: Hostname set to .
[ 4.822692] systemd[1]: Initializing machine ID from random generator.
[ 4.955318] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
[ 4.955443] systemd[1]: Using hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0, device /dev/watchdog0
[ 4.955453] systemd[1]: Watchdog running with a hardware timeout of 1min.
[ 5.334959] zram_generator::config[218]: zram0: system has too much memory (8062MB), limit is 0MB, ignoring.
[ 6.565539] systemd[1]: Failed to populate /etc with preset unit settings, ignoring: Read-only file system
[ 6.653931] systemd[1]: Queued start job for default target multi-user.target.
[ 6.681688] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 6.682021] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 6.682255] systemd[1]: Created slice system-rpi\x2dsetup\x2dloop.slice - Slice /system/rpi-setup-loop.
[ 6.682498] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[ 6.682728] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[ 6.682957] systemd[1]: Created slice system-systemd\x2dzram\x2dsetup.slice - Slice /system/systemd-zram-setup.
[ 6.683105] systemd[1]: Created slice user.slice - User and Session Slice.
[ 6.683187] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 6.683251] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 6.683424] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 6.683477] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-79f2bfac\x2d01.device - /dev/disk/by-partuuid/79f2bfac-01...
[ 6.683509] systemd[1]: Expecting device dev-ttyAMA10.device - /dev/ttyAMA10...
[ 6.683536] systemd[1]: Expecting device dev-zram0.device - /dev/zram0...
[ 6.683590] systemd[1]: Reached target paths.target - Path Units.
[ 6.683626] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 6.683659] systemd[1]: Reached target slices.target - Slice Units.
[ 6.684387] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[ 6.684477] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 6.684573] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 6.684672] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[ 6.684722] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki
[ 6.684738] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
[ 6.684802] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 6.684876] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 6.685011] systemd[1]: dev-hugepages.mount - Huge Pages File System skipped, unmet condition check ConditionPathExists=/sys/kernel/mm/hugepages
[ 6.687656] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 6.688216] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[ 6.688681] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 6.689136] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 6.689772] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 6.690333] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 6.690877] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 6.691412] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[ 6.691956] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 6.697092] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 6.697294] systemd[1]: systemd-fsck-root.service - File System Check on Root Device skipped, unmet condition check ConditionPathExists=!/run/initramfs/fsck-root
[ 6.697347] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
[ 6.769142] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 6.776426] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 6.781009] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
[ 6.785110] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 6.785213] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
[ 6.786094] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[ 6.787387] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 6.788210] fuse: init (API version 7.45)
[ 6.792468] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 6.792609] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[ 6.792689] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 6.792766] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 6.794800] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[ 6.795632] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[ 6.804635] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[ 6.805012] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[ 6.805119] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[ 6.805319] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[ 6.805394] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[ 6.806101] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[ 6.813099] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[ 6.820479] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[ 6.821226] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[ 6.821735] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
[ 6.885215] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[ 7.114212] systemd[1]: modprobe@drm.service: Deactivated successfully.
[ 7.114342] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[ 7.930023] EXT4-fs (mmcblk0p2): re-mounted 15f4c6be-1102-4331-9904-f78e78afd1fd r/w.
[ 7.930732] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
[ 7.931575] systemd[1]: Starting regenerate_ssh_host_keys.service - Regenerate SSH host keys...
[ 7.932430] systemd[1]: Starting rpi-resize-swap-file.service - rpi-resize-var-swap-service - resize swapfile...
[ 7.933652] systemd[1]: Starting systemd-growfs-root.service - Grow Root File System...
[ 7.976304] systemd[1]: systemd-hwdb-update.service - Rebuild Hardware Database skipped, unmet condition check ConditionNeedsUpdate=/etc
[ 7.976373] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/fs/pstore
[ 8.003387] zram: Added device: zram0
[ 8.003532] systemd[1]: Starting systemd-random-seed.service - Load/Save OS Random Seed...
[ 8.003634] systemd[1]: systemd-tpm2-setup.service - TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
[ 8.027612] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[ 8.035162] systemd-journald[298]: Collecting audit messages is disabled.
[ 8.045523] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 8.046914] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 8.070863] systemd[1]: Started systemd-journald.service - Journal Service.
[ 9.067198] systemd-journald[298]: Received client request to flush runtime journal.
[ 9.124316] EXT4-fs (mmcblk0p2): resizing filesystem from 130939136 to 130939136 blocks
[ 11.492974] bcm2835-pm 107d200000.watchdog: sync_state() pending due to 1002000000.v3d
[ 16.214402] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 112: bad block bitmap checksum
[ 18.360060] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 240: bad block bitmap checksum
[ 19.274673] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 368: bad block bitmap checksum
[ 19.296517] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 496: bad block bitmap checksum
[ 19.437285] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 624: bad block bitmap checksum
[ 19.455360] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 752: bad block bitmap checksum
[ 19.478923] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 880: bad block bitmap checksum
[ 19.500792] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1008: bad block bitmap checksum
[ 21.423555] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1136: bad block bitmap checksum
[ 21.447845] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1264: bad block bitmap checksum
[ 22.627003] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1392: bad block bitmap checksum
[ 22.660390] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1520: bad block bitmap checksum
[ 23.577973] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1648: bad block bitmap checksum
[ 23.598082] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1776: bad block bitmap checksum
[ 24.486683] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 1904: bad block bitmap checksum
[ 24.507934] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2032: bad block bitmap checksum
[ 26.822624] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2160: bad block bitmap checksum
[ 26.837549] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2288: bad block bitmap checksum
[ 28.904327] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2416: bad block bitmap checksum
[ 28.906402] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 2654208
[ 28.919675] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2544: bad block bitmap checksum
[ 28.927374] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 4096000
[ 28.944211] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2672: bad block bitmap checksum
[ 28.955974] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 7962624
[ 28.969259] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2800: bad block bitmap checksum
[ 28.971342] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 11239424
[ 28.986526] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 2928: bad block bitmap checksum
[ 28.988591] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 20480000
[ 29.001870] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 3056: bad block bitmap checksum
[ 29.003980] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 23887872
[ 29.021106] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 3184: bad block bitmap checksum
[ 29.024834] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 71663616
[ 29.038115] EXT4-fs error (device mmcblk0p2): ext4_validate_block_bitmap:423: comm ext4lazyinit: bg 3312: bad block bitmap checksum
[ 29.040671] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 78675968
[ 29.059155] EXT4-fs (mmcblk0p2): Invalid checksum for backup superblock 102400000
[ 30.316994] loop0: detected capacity change from 0 to 4194304
[ 30.604586] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 30.604669] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 30.605107] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 30.605147] rp1-firmware rp1_firmware: RP1 Firmware version 23fca1cd776798b50bd3e640ecb242215778e7f8
[ 30.605185] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 30.605210] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 30.605242] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 30.605260] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 30.605285] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 30.605321] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 30.605345] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 30.647413] rp1-pio 1f00178000.pio: Created instance as pio0
[ 30.666023] zram: setup backing device /dev/disk/by-backingfile/var-swap
[ 30.666823] zram0: detected capacity change from 0 to 4194304
[ 30.714608] mc: Linux media interface: v0.10
[ 30.774131] v3d 1002000000.v3d: [drm] Transparent Hugepage support is recommended for optimal performance on this platform!
[ 30.786867] [drm] Initialized v3d 1.0.0 for 1002000000.v3d on minor 0
[ 30.815003] videodev: Linux video capture interface: v2.00
[ 30.859348] Adding 2097136k swap on /dev/zram0. Priority:100 extents:1 across:2097136k SS
[ 30.928494] rpi-hevc-dec 1000800000.codec: Device registered as /dev/video19
[ 30.939263] Bluetooth: Core ver 2.22
[ 30.939298] NET: Registered PF_BLUETOOTH protocol family
[ 30.939403] Bluetooth: HCI device and connection manager initialized
[ 30.939435] Bluetooth: HCI socket layer initialized
[ 30.939460] Bluetooth: L2CAP socket layer initialized
[ 30.939487] Bluetooth: SCO socket layer initialized
[ 30.980637] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 30.980645] Bluetooth: HCI UART driver ver 2.3
[ 30.980653] Bluetooth: HCI UART protocol H4 registered
[ 30.982192] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 30.982476] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 30.982544] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 30.982633] Bluetooth: HCI UART protocol Broadcom registered
[ 30.985921] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 30.986116] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 30.986304] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 30.986492] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 31.333340] Bluetooth: hci0: BCM: chip id 107
[ 31.333556] Bluetooth: hci0: BCM: features 0x2f
[ 31.334601] Bluetooth: hci0: BCM4345C0
[ 31.334604] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 31.802183] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.raspberrypi,5-model-b.hcd' Patch
[ 31.810720] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 31.812476] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 31.812587] usbcore: registered new interface driver brcmfmac
[ 31.826163] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 31.831284] Registered IR keymap rc-cec
[ 31.831315] rc rc0: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0
[ 31.831357] input: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0/input1
[ 31.832962] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc@107c000000/107c701400.hdmi/sound/card0/input2
[ 31.837092] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[ 31.842315] Registered IR keymap rc-cec
[ 31.842350] rc rc1: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1
[ 31.842389] input: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1/input3
[ 31.843364] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc@107c000000/107c706400.hdmi/sound/card1/input4
[ 31.848476] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[ 31.848605] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[ 31.848662] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[ 31.848715] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 31.848762] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 31.849421] [drm] Initialized vc4 0.0.0 for axi:gpu on minor 1
[ 31.856001] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 31.865107] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 31.874938] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 32.176990] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 32.177245] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[ 32.469519] Bluetooth: hci0: BCM: features 0x2f
[ 32.470850] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 32.470855] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 32.471144] Bluetooth: hci0: BCM: Using default device address (43:45:c0:00:1f:ac)
Additional context
Troubleshooting already attempted (unsuccessful on 6.18):
pcie_aspm=off)nvme_core.hmb=0)nvme_core.default_ps_max_latency_us=0)nvme.noacpi=1)dtparam=pciex1_gen=2)